The box contains the following components for assembly.

1. Sharpening Machine.

2. Blade Support Frame.

3. Blade Support Telescopic Arms.

4. Stand Attachment Lugs – 1 x single left hand – 1 x double (V) right hand.

5. Stand Legs – 3 sets of 3 telescopic.

6. Power Supply – (optional with manual machine)

7. Plastic Bag containing tools fasteners and Blade Support Posts

8. Grinding wheel.

9. Instruction CD

                        10. Handle ( Manual machine only)

(1) Secure the Stand Attachment Lugs between the machine’s front and rear plates as per diagram.

Extend and tighten the 3 telescopic legs before securing to the attachment lugs and lifting the Grinding Head Arm into its raised position (retained by a latch on the arm).