Magnet Positioning for Counting
Place the magnet supplied onto the chain as shown in fig. below.
Do not place the magnet on a tie link (link between cutters) as the machine will not function correctly.
The magnet placed on the side of the chain references the number of chain rotations in all modes.
The magnet must be placed on a cutter. Placing the magnet on a tie link will not allow the machine to count correctly.
Press the "COUNT" button to indicate how many times the chain will circuit the machine. A maximum of nine(9) times may be entered.
If the count is set to one (1), the machine will stop when the magnet passes the proximity switch.