SAFETY PROCEDURES
·
Always wear a safety visor·
Always wear a dust mask·
Never stand or allow other people behind machine.·
Do not operate machine without safety guards in place·
Always check grinding wheels for cracks before use·
Keep hands out of machine when connected to power
Specifications and safety measures
| Requirements | Description | Range |
| Temperature | Operating | +5° to +35° Celcius |
| Power | Current Requirement | 8 amps continuous |
| Over current & Overload protection | 15 amp fuse | |
| Voltage operating range | 12 to 15 volts DC Stabilised & Regulated +/- 0.1% | |
| Safety | AC input | It is recommended to fit a residual current protection device when using an AC/DC power source. |
| AC Supply | Disconnect the power supply when not in use | |
| Guards | Do not use unless all safety guards are fitted. | |
| Maintenance | Disconnect from power before performing any maintenance. | |
| Grinding wheels | Check speed rating and condition before use | |
| Environment | Operating | Use in a ventilated and well lit area. |
| Weight | Gross | 22 kg |
| Installation | Positioning | Machine should be positioned in such a way as to prevent access to the rear when machine is operating. |
| Transportation | Lifting | Lift only from underneath the machine. |
| Transporting | Use the original packagin |