Dinasaw® T-Rex Chian Sharpener
Instruction Manual   Version 6.0

Adjusting the Feed Stroke and Pawl Height

Using the Inch Fwd button, Inch machine until feed pawl is all the way back and adjust the feed stroke adjuster until the feed pusher plate is positioned just in front of the depth gauge.

Set the feed pawl height adjuster so that the feed pusher plate is just above the tie links. see below.

Feed Pawl resting on depth gauge

Tooth to be sharpened

Feed Stroke adjuster
(Wind screw to move feed arm)

Feed Pusher Plate

Feed arm all the way back